# Model Settings

### Model Select

Pressing the **\[MDL]** button from the Main view will open the **Model Select** screen.

<figure><img src="https://77164042-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FUZeEhX4mYsDsoTCSjRyi%2Fuploads%2Fgit-blob-7bc24f1bad442c843157967473acbab24e5980a5%2Fbwmodelsel.png?alt=media" alt=""><figcaption><p>Model Select screen</p></figcaption></figure>

Use the **\[Roller]** or **\[Dial]** to scroll through the model slots.

Pressing **\[Enter]** on an empty model slot will give you the following options:

* **Create Model** - This option creates a new model with the default configuration options.
* **Restore Model** - This option creates a new copy of a selected model that has been previously backed up.

Pressing **\[Enter]** on an occupied model slot that is not the active model (not marked with an asterix **\***) will give you the following options:

* **Select Model** - this option selects this model as the active model.
* **Backup Model** - This option makes a copy of the model in the **Backup** folder on the SD Card.
* **Copy Model** - This option makes an exact copy of the model and allows you to select which model slot it will be placed in.
* **Move Model** - This option allows you to move the selected model to a different model slot.
* **Delete Model** - This option deletes the selected model.

Pressing **\[Enter]** on an occupied model slot that is the active model (marked with an asterix **\***) will give you the following options:

* **Move Model** - This option allows you to move the selected model to a different model slot.
* **Copy Model** - This option makes an exact copy of the model and allows you to select which model slot it will be placed in.
* **Backup Model** - This option makes a copy of the model in the **Backup** folder on the SD Card.

Pressing the **\[PAGE>]** button will take you to the **Setup** screen.